Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Olympia Chimney Chimney Sweep in New York: What to Know First
An Olympia Chimney chimney sweep in New York typically costs between $189 and $340 for a standard open-flue fireplace, and most homes we service are done in under two hours. We’re an independent Olympia Chimney service provider, not an authorized dealer, which means we tell you straight what’s wearing out and what still has years left in it. Nathan Corliss and our New York crew work on Olympia Chimney systems all over Manhattan, Brooklyn, and Queens, and we quote a firm written price before a brush ever comes off the truck.
If you’re here because the last guy flaked or the last sweep left more soot on your hearth than he took out of the flue, you’re in the right place. Call (315) 644-2982 and you’ll get a live person, not a voicemail.
How Olympia Chimney Products Fail – and How We Fix Them
Olympia Chimney makes solid equipment, but every brand has patterns. Here’s what we actually see in New York homes, which Olympia lines are involved, and what we do about it:
- Olympia Eliminator Series caps with caked-on creosote. The Eliminator’s expanded mesh screen does a good job of keeping animals out, but in New York’s damp winters, the screen also traps creosote glaze that would otherwise blow free. We see a lot of Eliminators with airflow cut by a third or more. Our sweep removes the cap, cleans the screen with a wire brush rather than a scraper (so the mesh isn’t deformed), and checks the weld points where the cap body meets the mounting bracket.
- Olympia Guardian stainless liners with rust streaks at the connector. This one surprises people. Stainless steel doesn’t rust the way cast iron does, but the Guardian line’s thin-gauge connector bands can develop surface staining where salty coastal air or winter road-treatment residue gets tracked up onto the roof. It’s almost always cosmetic, not structural. We clean it, photograph it, and note it in your written report so you’re not later told you need a liner replacement you don’t.
- Olympia FireFlex liners with ovalization after a rough install. FireFlex is a flexible liner designed for chases and offsets, and it’s a good product. But we’ve pulled enough of them out of older New York row houses to know the weak point: an installer who didn’t use a proper pulling cone can leave the bottom section slightly oval. That disturbs the draft and creates a dead spot where soot piles up. We catch it during a Level 2 scan, correct what can be corrected at the connector, and tell you honestly if a section needs replacing.
- Olympia chimney caps with missing or loose spark arrestor screens. New York is raccoon country, and a compromised spark screen is an open invitation. We check every cap on every sweep, and if the screen’s torn or the fasteners have vibrated loose, we’ll either reseat it or quote you a replacement before we put the brush away. You’ll know the number before we touch it.
- Creosote glazing on Olympia stainless components in short, cold flues. New York winters mean short, cold exterior chases. Stainless stays cooler than masonry, which means smoke condenses faster and builds a hard, shiny third-degree creosote faster than you’d expect. We use rotary cleaning with poly rods and gentle flail tips on stainless, never harsh scrapers, so the metal wall isn’t scored. Scratched stainless grabs soot faster. That’s a $300 mistake that takes years to compound, and we’d rather not make it.
Styles & brands we work with





Our Olympia Chimney Chimney Sweep Process
Every Olympia chimney job in New York follows the same sequence, and you’ll know what it costs before step two ever happens:
- 1
You call, a person answers. Our phones are staffed by a live person 24/7, so you’re not leaving a message and hoping. We’ll ask what Olympia product you have, what you’re seeing, and when works for you.
- 2
We show up in jeans and a uniform, not a costume. Background-checked, uniformed technicians arrive in the window we gave you. We lay drop cloths before anything comes off the truck.
- 3
We inspect before we sweep. A quick visual check of the firebox, damper, cap, and accessible liner sections, plus a camera run if you’ve got a Guardian or FireFlex liner or any sign of trouble. You’ll see the screen with us.
- 4
We clean the system, not just the easy reach. We brush the flue from the top or bottom, vacuum with a HEPA-stage filter, remove soot and creosote from the smoke shelf and damper seat, and clean the cap if it’s an Olympia cap. We also clean the firebox and remove all debris from the roof and hearth. The area is left cleaner than we found it, because ash is in our name.
- 5
We write the price before we fix anything extra. If you need a new cap, a connector adjustment, or a liner repair, we quote a written price and get your okay before any repair work starts. No surprises at the door. The price on the invoice matches the price we quoted.
- 6
We hand you the written report and the guarantee. Before we leave, you get a written summary of what we found, what we did, and what we recommend. Every repair is backed by our written guarantee, and if a covered repair fails inside the guarantee period, we come back and fix it at no charge. That’s the 365-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Olympia Chimney Chimney Sweep Costs in New York
Straight numbers, because that’s how we operate. Most Olympia Chimney sweeps in New York run between $189 and $340 for a standard open-flue fireplace with a single story of flue. Here’s the breakdown:
- Standard sweep (no cap replacement, no liner issues): $189 – $260
- Sweep with camera inspection: $289 – $340
- Sweep with cap cleaning or minor cap repair: $240 – $310
- Sweep with creosote glaze removal (rotary cleaning): $310 – $380
- Sweep with connector adjustment or minor parts replacement: quoted on the spot, always in writing, always before we do the work
What moves the price is flue length, how heavy the buildup is, and whether you’ve got a Guardian stainless liner or a masonry flue. We’ll give you an exact number before anything starts. Call (315) 644-2982 for a free estimate, and it’ll be the same number when we leave.
Why New York Homeowners Call Ashby Chimney New York for Olympia Chimney Work
Most people who call us have already been burned once. A tech who ghosted. A quote that doubled at the door. A liner repair that cracked again in a month. So we built the company around a simple promise, the Kingswell Guarantee: say the price first, show up in the window, leave it cleaner, put the guarantee in writing, and come back if it fails. Nathan’s signature rule, the one he says on every job site, is “Say the price first, put the findings in writing, and let the work speak for itself.” That’s how we’ve operated here in New York since 2002.
We’re not authorized by Olympia Chimney, and we don’t pretend to be. We’re independent, which means we can tell you when a part is genuinely shot and when it just needs cleaning. And because we stock and work with other trade brands like DuraFlex liners, HeatShield, and Gelco, we can offer real alternatives if an Olympia part is backordered or simply not the right fit for your flue. We’d rather put the right part in than the convenient one.
FAQs
No. As long as the work is performed by a qualified chimney professional, routine sweeping and standard parts replacement don’t void your manufacturer’s warranty. We document everything we do, so if a warranty claim ever comes up, you’ve got a written record from us.
At least once a year if you burn regularly, and more often if you burn unseasoned wood or live in a New York neighborhood with short, cold exterior flues. Two sessions of heavy burning can build enough creosote to matter. We’ll tell you honestly if you can stretch it, and we’ll write the recommendation in your camera report.
Often yes. We carry common Olympia caps and connector components on the truck, and we stock DuraFlex, HeatShield, and Gelco alternatives for cases where an Olympia part is backordered or not the best fit. If it’s a specialty order, we’ll give you a written quote and a real arrival window for the part.
If you’ve got a Guardian or FireFlex liner, we strongly recommend a camera run. These liners hide cracks and connector issues that a brush will never catch, and by the time you see performance problems, the repair is usually more expensive. If you’ve got a straight masonry chimney and you burn dry wood, a standard sweep is often all that’s needed. We’ll show you the camera feed either way, and you decide. Call (315) 644-2982 and we’ll get you scheduled.
Written by Nathan Corliss, Owner, Ashby Chimney New York at Ashby Chimney New York, serving New York and nearby areas.